FIRMWARE TP LINK WR841N TPLINK

This device is NOT RECOMMENDED for future use with annexsport.store due khổng lồ low flash/ram.

Bạn đang xem: Firmware Tp Link Wr841N Tplink

DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to lớn flash an up-to-date và secure annexsport.store version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure & reliable operation.This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See annexsport.store on 4/32 devices what you can vày now.

2) annexsport.store tư vấn for this device will kết thúc after 2019.19.07 will be the last official build for 4/32 devices. After 19.07, no further annexsport.store images will be built for 4/32 devices. See annexsport.store on 4/32 devices what you can bởi now.


Note1: The TL-WR841N is identical except that the antennas are not detachable. TP-Link naming scheme is, that devices ending in a D have detachable antennas.Note2: v5.2, v5.4 etc. Are all v5, similarly for v7, v8, v9. The only difference is the firmware version they come with.


Sometimes, version x. Is only available in the PRC & version y. Is intended for sale world-wide. The hardware between version x. & version y. Can differ significantly but does not have to.
Sometimes, there is Version x. For PRC only và Version x. For world-wide sale. If there is a special chinese-Version with the same major-number, then that version has usually significantly different hardware
Version/Model Launch Date annexsport.store Versions Supported mã sản phẩm Specific Notes
v1.x 2007 10.03 và newer Added mã sản phẩm support
v3.x 2008 10.03 & newer Report
v5.x 2010 10.03 & newer Report
v7.x 2010 12.09 & newer UFO shape – Fully working with 12.09
v8.x (China) ? - 2 MiB flash is not enough khổng lồ run annexsport.store, needs hardware mod. Worked with r29631 trunk.
v8.x (international) 2012-Aug 12.09 và newer DB120 diễn đàn thread
v9.x năm trước 14.07 và newer
v10.x (China) ? - 1 MiB flash is not enough khổng lồ run annexsport.store, needs hardware mod.
v10.x (international) năm ngoái 15.05.1 diễn đàn thread here. Corresponding ticket –> Ticket 20757
v11.x 2015 v10 image or trunk oder LEDE 17.01.2 forum thread here. Only the flash cpu seems lớn be different compared lớn v10.x. You can use 15.05 images for v10 with sysupgrade -F, overriding the hardware check. Compared to lớn v10.0, the antennas have a different shape (a lot like the antennas shipped with Archer C7), & the WAN LED is now duocolour, green và orange. For v15.05.1, an image built from SVN r49389 works out of the box.
v12.x năm nhâm thìn LEDE 17.01.2
v13.x 2017 18.06 và newer Major hardware difference to previous models, now Mediatek based, Wifi now stable, WANLAN Leakage during boot.
v14.x 2018 -

Community builds


annexsport.store 19.07 ath79 tiny, including LuCI, see this diễn đàn thread.

Xem thêm: 5 Cách Khắc Phục Lỗi Bluestacks Không Chạy, Sửa Lỗi Bluestacks Load Mãi Không Vào Được


Over 500 days

The TP-Link TL-WRN841N(D) running over 500 days on an Enterprise Level

https://www.dropbox.com/s/lfi35i2toc1iwhv/lede524days.png?dl=0


Version v3 v5 v7 v8 v9 v10 v11 v12 v13 v14
Instruction set: MIPS
Vendor: Atheros MediaTek
bootloader: uboot
System-On-Chip: AR9130 AR7240 rev 2 AR7241-AH1A AR9341 QCA9533-AL3A QCA9533-BL3A QCA9533-AL3A MT7628NN
cpu Frq: 400 MHz 535 MHz 550 MHz 650 MHz 575 MHz
BogoMIPS: 265.42 265.42 265.42 266.64 366.18 432.53 385.84 385.84
Flash-Chip: ST 25P32V6P Hynix Eon EN25F32-100HIP Spansion FL032PIF Winbond 25Q32FVS1G Spansion FL032PIF GigaDevice 25Q64CSIG GigaDevice 25Q32CSIG
Flash size: 4 MiB 8 MiB 4 MiB
RAM-Chip: Hynix HY5DU561622FTP-5 Zentel A3S56D40ETP-G5 ESMT M13S2561616A-5T Winbond W9425G6JH-5 Zentel A3S56D40GTP-50 Zentel A3S56D40GTP-50L ESMT M14D5121632A -2.5B / Winbond W9751G6KB-25 Zentel A3S56D40GTP-50L
RAM size: 32 MiB 64 MiB 32 MiB
Wireless: Atheros AR9100 Rev:7 Atheros AR9280 Rev:2 Atheros AR9287-BL1A 2.4GHz 802.11bgn AR9341 QCA9533-AL3A QCA9533-BL3A QCA9533-AL3A MT7628NN
switch: Marvell 88E6060 AR7240 built-in AR7241 built-in AR9341 built-in QCA9533-AL3A built-in QCA9533-BL3A built-in MT7628NN built-in
USB: 1.1 thủ thuật 2.0 mod 2.0 gian lận No No 2.0 thủ thuật No
Serial: Yes Remove R26 Remove R26 & bridge R23 Yes
JTAG: Yes Yes No

The port indexes in annexsport.store & in hardware (on the case) are mangled (at least in Barrier Breaker):


It is possible to lớn run 802.1Q tags on these ports. As of Chaos Calmer mixed (tagged/untagged) VLANs are working, và can be configured via LUCI.The maximum VLAN number is 15

eth1 is directly connected lớn the WAN port.


Model↓ VersionCurrent Relannexsport.store Install Imageannexsport.store nâng cấp Image
TL-WR841N(D)1, 1.518.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v1.5-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v1.5-squashfs-sysupgrade.bin
TL-WR841N(D)v1018.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v10-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v10-squashfs-sysupgrade.bin
TL-WR841N(D)v1118.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v11-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v11-squashfs-sysupgrade.bin
TL-WR841N(D)v1218.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v12-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v12-squashfs-sysupgrade.bin
TL-WR841Nv1321.02.0http://downloads.annexsport.store/releases/21.02.0/targets/ramips/mt76x8/annexsport.store-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-tftp-recovery.binhttp://downloads.annexsport.store/releases/21.02.0/targets/ramips/mt76x8/annexsport.store-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin
TL-WR841Nv14snapshot
TL-WR841N(D)v318.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v3-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v3-squashfs-sysupgrade.bin
TL-WR841N(D)v518.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v5-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v5-squashfs-sysupgrade.bin
TL-WR841N(D)v718.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-sysupgrade.bin
TL-WR841N(D)v817.01.7http://downloads.annexsport.store/releases/17.01.7/targets/ar71xx/generic/lede-17.01.7-ar71xx-generic-tl-wr841-v8-squashfs-factory.binhttp://downloads.annexsport.store/releases/17.01.7/targets/ar71xx/generic/lede-17.01.7-ar71xx-generic-tl-wr841-v8-squashfs-sysupgrade.bin
TL-WR841N(D)v918.06.9http://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v9-squashfs-factory.binhttp://downloads.annexsport.store/releases/18.06.9/targets/ar71xx/tiny/annexsport.store-18.06.9-ar71xx-tiny-tl-wr841-v9-squashfs-sysupgrade.bin

For DD(trunk) there is a change going on to remove the “N” & “ND”-suffix from the imagename (only “-tl-wr841-v10.bin”).

Installing via web interface:


Log in lớn router website interface và select the firmware image you just uploaded as an update.
Sit và wait while it flashes. It will reboot và be accessible at 192.168.1.1.

The Barrier Breaker image already includes a GUI, you do not have lớn install it manually.

*
Note: Newest version of tp liên kết firmware (tested on TL-WR841N_V9_150310 / 3.16.9) does not accept annexsport.store firmware filename, because they are too long ; rename it to lớn something GUI), only telnet and ssh access. You can install GUI, for details see: luci.essentials, but before install LuCI (GUI) you need lớn configure your router to lớn have access to lớn internet, for configuration see: internet.connection


For v8...v13 TFTP install is much easier

Beware that this installation method needs a TTL màn chơi serial console usb to lớn TTL like DKU-5 data cable or RS232-TTL cấp độ shifter lượt thích this:

*
and a working TFTP server và should not be attempted unless you have experience with this sort of thing or are eager to learn.

This is taken more or less verbatim from https://forum.annexsport.store/viewtopic.php?id=24203, thanks lớn dl3daz.


Hook up the serial console as explained in the section “serial console”. At the prompt “Autobooting in 1 seconds” type “tpl” quickly lớn start a uboot console.
Now we need to set router và server IP addresses (here named ROUTERIP & SERVERIP, substitute these with the real IP addresses).

Type in the console:

setenv ipaddr ROUTERIPsetenv serverip SERVERIPprintenvFor example: Configure this static ip for your LAN card 192.168.1.100. If your computer containing other LAN or Wifi card, disable it!

Type in the console

setenv ipaddr 192.168.1.111setenv serverip 192.168.1.100192.168.1.111 is the router ip, 192.168.1.100 is the TFTP vps ip.


Uboot needs the tftp server to be listening on port 69. Make sure your hệ thống is configured khổng lồ listen khổng lồ that port. Now we can load the firmware over TFTP with “tftpboot 0x80000000 annexsport.store-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin”:

ar7240> tftpboot 0x80000000 annexsport.store-ar71xx-generic-tl-wr841n-v8-squashfs-factory.binUsing eth0 deviceTFTP from server 192.168.1.100; our IP address is 192.168.1.111Filename 'annexsport.store-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin'.Load address: 0x80000000Loading: checksum bad################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################doneBytes transferred = 3932160 (3c0000 hex)
note the “3c0000” in the last line (your number may differ). Now execute the following commands, if necessary replacing 3c0000 with the number you got from tftpboot
Type:

printenv bootcmdTake chú ý of the address & use it as flash erase start address.

For TL-WR841ND v3:

1. Erase the flash:

ar7100> erase 0xbf020000 +0x3c0000 First 0x2 last 0x3d sector size 0x10000 61 Erased 60 sectors 2.Copy RAM content to flash:

ar7100> cp.b 0x80000000 0xbf020000 0x3c0000 Copy to Flash... Write addr: bf020000 done 3.Reset

ar7100> reset Resetting...4. Done.

For TL-WR841ND v5, v7, v8, v9:

1. Erase the flash:

wasp> erase 0x9f020000 +0x3c00002. Copy RAM nội dung to flash:

wasp> cp.b 0x80000000 0x9f020000 0x3c00003. Set up the boot

wasp> bootm 0x9f020000## Booting image at 9f020000 ...Uncompressing Kernel Image ... OKStarting kernel ...4. Done.


As most other current TP-Link routers this device can be flashed and debricked without serial access. Basically, the procedure is as follows:


phối your PC to use the static IP address 192.168.0.66 (the router will have 192.168.0.86 or 192.168.0.2 for v13)